Dynascan Manual (RT3005G) v_0611
Issue 1
© Copyright Measurement Devices Limited
Copying of the materials in this document is prohibited
Page 19
Next ensure the QINSy dongle is inserted in the laptop USB socket and power up the laptop
computer. Check the computer time is set to local time before starting the QINSy
application. After clicking on the ‘online’ icon you should display a screen similar to the one
below with the alerts shown in the bottom left of the screen.
Check the computer clock is set to local time.
7.5
System initialisation
In order to enable a useable output from the motion sensor it is necessary to start the vehicle
or vessel moving for approximately 1 minute. Ideally a figure of eight track should be driven
at slow speed (approximately 15-20 KPH) and you will see the appropriate alert display
change from red to green plus the status window will show the INS status when the system is
initialised (see screenshot below).
N.B. It is important to only move in a forward direction whilst initialising the system
