background image

Page 5 

 

2.2 General safety instructions 
 

When using this machine observe the following safety instructions, to exclude 
the risk of personal injury or material damage. 
 
Please also observe the special safety instructions in the respective chapters; where 
applicable, follow the legal directives or regulations for the prevention of accidents 
pertaining to the use of circular saw. 
 

General hazards! 
 

1. Be alert. Know what you are doing. Set out to work the reason. Do not operate 
machine while under the influence of drugs, alcohol or medication. 
2. Keep your work area tidy-a messy work area invites accidents. 
3. Regularly clear the work area of the cut logs. 
4. Prevent adverse body positions. Ensure firm footing and keep your balance 
at all times. 
5. Consider environmental effects: 
Provide proper lighting. 
Do not operate machine near inflammable liquids or gases. 
This machine shall only be started and operated by a person familiar with 
circular saw and who is at all times aware of the dangers associated with the 
use of such machine. 
Keep bystanders, particularly children, us of the danger zone. Persons 
under 18 years of age shall use this machine only in the course of them 
vocational training, under the supervision of an instructor. 
Do not permit other persons to touch the machine while it is running. 
 

Risk of personal injury and crushing by moving parts! 

Do not operate the machine without installed guard. 
Keep sufficient distance to driven components when operating the machine. 
Ensure the machine is disconnected from power supply before servicing. 
Ensure that when engine start (e.g. After servicing) no tools or loose parts are left 
on or in the machine. 
Turn engine off if the machine is not used. 
 

Hazard generated by modification of the machine or use of 
parts not tested and approved by the equipment manufacturer! 

Use only parts approved by the equipment manufacturer. 
This applies particularly to: 
- Saw blade 

(see “Technical specifications”)

 

- Safety devices 

(see “Spare parts list”)

 

 

Содержание 15HP

















Отзывы: