Page 6
Do not change any parts.
Hazard generated by machine defects!
Keep machine and accessories in good repair.
Observe the maintenance instructions.
Before any use check machine for possible damage:
Before operating the machine all safety devices, protective guards or slightly
damaged parts need to be checked for proper function as specified.
Checked to see that all moving parts work properly and do not jam.
All parts must be correctly installed and meet all conditions necessary for the proper
operation of the machine.
Damaged protection devices or parts must be repaired or replaced by a qualified
specialist.
Keep handles free of oil, grease and resin.
2.3 Safety devices Motor protection
The engine motor protection stops the motor by over-current detection, should
the motor be locked (e.g.by a jamming saw blade)
The feed rocker allows for a safe feeding of the logs to be cut.
When the feed rocker is released it must automatically return to its starting
position.
Blade guard
During operation the blade guard must always be installed. It must not show any
signs of damage.
2.4 Warning symbols
Disregard of the following warning could lead to severe personal injury or material
damage.
Wearing hearing protection.
Use this machine out of doors only.
3.Machine installation
3.1 Unpacking
Hazard generated by missing parts!
To prevent accidental starting that could cause possible serious personal
injury, assemble all parts to your machine before connecting it to power
Содержание 15HP
Страница 12: ...Page 12 ...
Страница 13: ...Page 13 ...
Страница 14: ...Page 14 ...
Страница 16: ...Page 16 01228 712121 www mdlpowerup com info mdlpowerup com ...