MD MD-AWD-150, Руководство пользователя

Страница: 37 / 49

Mustang Dynamometer MD-AWD-150 Page 37
C
AUTION
If your dynamometer has not been operated for a log period of time (5 or more
months) we STRONGLY suggest that you manually rotate the rolls of the dynamometer for
about 10 minutes prior to operating the unit. Doing so will enable the bearings to re-
establish their self-alignment, thereby minimizing the likelihood of damaging your machine
when its is operated under power
(B) Locking Bearing To Shaft
The inner race of each bearing is securely locked to the shaft on which they
are mounted by means of two setscrews in the bearing’s collar.
For normal duty application, relubricate monthly with Shell Alvania # 2 grease (or
standard Lithium base grease # 2), until excess grease is visible at the bearing seals.
Wipe off excess grease.
6.2.2 Gear Toothed Couplings
Gear toothed couplings are used in the drive line of your dynamometer between major
sub-assemblies (ex. Rolls, PAUs) for the purposes of transmitting torque and enabling
the sub-assemblies to be easily removed from the dyne and allowing for slight offset
and angular misalignment as well as end float in drive line components.
Once a month remove
the grease plugs from
the coupling’s sleeve on
both sides. Using a
hand held grease gun,
with Shell Alvania # 2
grease (or standard
Lithium base grease #
2)
pump 2 full pumps into
each coupling. Wipe
excess grease off with a
clean rag and replace
grease plugs.