www.themdsports.com
YUS450_018M
7
YOU ARE NOW READY TO PLAY!
(The last page)
WARNING:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with the part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation.
GAME DESCRIPTIONS:
1: Press the ON/OFF key to start the game (playing the boot sound, and 3 LED lights will light up for 3 seconds).
2: Game time is 2 minutes.
3: After the game starts, one of 3 LED lights will light up for 2 seconds randomly. (If it is not hit within 2 seconds, another LED light will light up
randomly).
4: After the game is over, click the ON/OFF key to restart the game.
NOTE: The game will automatically power off if it is left idle for 5 minutes. It is recommended that you turn off
the Control Box and take out the battery when not in use.
NOTE: Pressing the “ON/OFF” key at any point for three seconds will turn the game off.
Battery Installation
1. Using a Phillips Head Screwdriver (not included), remove the battery box cover on the back of the Control Box and install
2 new “AAA” batteries.
2. Replace the battery box cover using a Phillips Head Screwdriver (not included).
Reminder:
a. Batteries must be installed according to the correct polarization (+and -) required.
b. If the game will not be used for a long period of time, we recommend that the batteries should be removed.
c. Please clean the battery contacts and also those of the device prior to battery installation.
WARNING:
!
1) Requires 2 “AAA”
batteries (not included).
2) Do not mix old and new batteries.
3) Do not mix alkaline, standard (carbon zinc), or
rechargeable (nickel-cadmium) batteries.
When
“ON / OFF”
is pressed once, it starts up, when pressed and held for 3 seconds, it shuts down.
Control Box Operation
