6
3.5 GPS Antenna Installation
The GPS antenna must be installed where it has a clear view of the sky, so that it may access the
horizon freely with 360° degrees, with a vertical observation of 5 to 90 degrees above the horizon
as illustrated above.
GPS ANTENNA LOCATION
Note the GPS antenna location with reference to the ships plan view in meters in APPENDIX (C).
Figure 3
GPS Antenna location
3.6 Mounting Smartfind M5
Use the following guidelines to check the installation location for your AIS transponder:
The AIS transponder should be mounted in a location that is accessible and readable to
user at all time.
The transponder should be installed in a protected environment away from direct rain and
water contact.
The transponder is designed to operate in an environment with 15°C ~ 55°C temperature.
Environments with excessive heat may cause damages to the transponder.
The transponder should not be installed near flammable or hazardous environments.
The AIS transponder should be installed at least 0.5m away from magnetic compasses.
3.6.1 Mounting Transponder
Figure 4
Mounting Smartfind M5
B
C
D
A
7
Panel Mounting (1)
1. Line up the mounting template on control panel to sketch an outline for the cutting area.
2. Using a jigsaw carefully cut along the sketched cutting area.
3. If necessary, clean up edge with glass paper or file.
4. Mount the transponder through the opening.
5. From the rear, install the mounting brackets with the M3X8 screws.
6. Apply the mounting bracket screw (brackets are directional ensure correct one is fitted to
each side) on each side for a firm fix.
Figure 5
Panel Mounting (1)
Panel Mounting (2)
Figure 5 Panel Mounting (2)