mcmurdo Smartfind M5 Скачать руководство пользователя страница 22

Страница: 22 / 52

After ETA (RFM21) transmitted, if no RTA (RFM22) is received within 15 minutes, transponder will

transmit ETA (RFM21).

After the addressee is selected, you can configure the ETA message.

Figure 32

Target Selection and ETA Report

4.6.4 POB Outbox

The submenu displays log of sent Number of person on board (RFM55/IFM16) messages. The

IMO version sends the total number of persons on board as a binary message with international

IFM16.

The Inland (IWW) version sends a message with number of crew, personnel and passengers as a

binary message with inland branch RFM55.

Figure 33

POB Outbox and POB Message Information

Use the knob to select a message and press the knob to display message content.

MMSI

2013/01/17 23:27:10

Dangerous Targets :0

[001]-NAME/MMSI------ET-BRG(

)-RNG(KM)

RNG(KM)DATE/TIME---- TX

. TEST01 3s 90 15.09

AIS TARGET LIST

CREATE ETA REPORT

2013/01/17 23:27:10

DESTINATION MMSI [200000001

]

TX CHANNEL <ALTERNATE>

Fairway Number [ABCDE]

UN Country [UK]

ETA [12/24 13:50]

Fairway Hectometre [LMINO]

Num Of TugBoat [6]

Terminal Code [FGHIJK]

UN Location [BTG]

Air Draught (m) [10.99 m]

--------------- ETA INFORMATION ---------------

Dangerous Targets :0

POB OUTBOX

2013/01/17 23:27:10

Targets Received :1

---DEST. MMSI -- TYPE -- DATE/TIME---- TX

. 200000001 RFM55 T 17:43 YES

MESSAGE INFORMATION

2013/01/17 23:27:10

Sour. MMSI 211000001

DEST. MMSI 200000001

TIME 2013/07/03 17:43:59

CREW MEMBERS [200]

TX OK YES

RX ACK YES

SHIPBOARD PERSONNEL [200]

PASSENGERS [1000]

ABK INFO Late received by the Dest.AIS

[10.99 m]

TX TYPE Addressed

Targets Received :1

4.6.5 Create POB Message

In this submenu users can compose number of person on board (RFM55/IFM16) messages.

Number of person on-board can be configured in Inland Setting 4.9.3.

By entering into the submenu, users will be prompted to select the addressee from the target list.

Here you can either pick the addressee from the list or press ESC to leave the target list to enter

the MMSI number manually or broadcast the POB message without specifying any addressee.

When “Broadcast” is selected, just omit the DESTINATION MMSI. Any entered number will be

ignored.

The

DATA TYPE

provides the option either to send the data in RFM16 or RFM55, as described in

4.6.4.

Tx CHANNEL

gives you the option to send the message through channel A, B or Alternate. By

Alternate, which is the default option, the system will select the channel automatically.

After ETA (RFM21) transmitted, if no RTA (RFM22) is received within 15 minutes, transponder will

transmit ETA (RFM21).

Figure 34

Target List and POB Message Content

4.6.6 EMMA Warning

The submenu displays log of EMMA warning (RFM23) messages. EMMA (European Multiservice

Meteorological Awareness system) Information is transmitted as broadcast message from shore to

ship as local weather warnings.

Figure 35

EMMA Warning log and Message Content

Use the knob to select a message and press the knob to display message content.

AIS TARGET LIST

2013/01/17 23:27:10

Dangerous Targets :0

[001]-NAME/MMSI-----ET-BRG(

)-RNG(KM)

RNG(KM)DATE/TIME---- TX

. TEST01 7s 90 15.09

MMSI

CREATE POB MSG.

2013/01/17 23:27:10

MSG. TYPE

DESTINATION MMSI [200000001]

DATA TYPE < RFM 55 >

TX CHANNEL <ALTERNATE>

----- INLAND PERSONS INFORMATION ------

CREW MEMBERS [200]

PASSENGERS [1000]

SHIPBOARD PERSONNEL [200]

----- SOLAS PERSONS INFORMATION --------

NUMBER OF PERSONS [1400]

Dangerous Targets :0

EMMA WARNING

2013/01/17 23:27:10

Dangerous Targets :0

----- MMSI ---- TYPE --- DATE/TIME -- READ

. 200000001 RFM23 T 17:48 NO

EMMA INFORMATION

2013/01/17 23:27:10

Dangerous Targets :0

Sour. MMSI 200000001 READ YES

START DATE 2013/07/02 15:30

END DATE 2255/12/31 24:60

START LON 121

54ʾ00"E

START LAT 025

09ʾ25"N

END LON 122

24ʾ00"E

END LAT 025

39ʾ25"N

TYPE FI :FIRE IN THE FORESTS

MIN VAL. -125 MAX VAL. 210

CLASSIFICATION STRONG, HEAVY

WIND DIRECTION NW

Содержание Smartfind M5





















































Результаты поиска

Содержание Smartfind M5

Отзывы:

mcmurdo Smartfind M5, Руководство по установке и обслуживанию, Страница: 22 / 52

Результаты поиска

Содержание Smartfind M5

Отзывы: