mcmurdo Smartfind M5, Руководство по установке и обслуживанию, Страница: 28 / 52

48
4.8.2 Voyage
4.8.2.1 SOLAS Mode
Figure 54 SOLAS Voyage Setting
In this submenu the following navigational information can be configured:

Destination – Ship’s next destination port (limited to 20 characters)
 ETA - Estimated time / date of arrival at destination (using UTC time)

Cargo – use the scroll wheel to select the suitable status from the list
 Navigational status – use the scroll wheel to select the suitable status from the list
 Person – the number of person on board
 Draught - Maximum present static draught to the nearest 1/10th of a metre
To save the settings, press MENU or ESC and the system will ask whether the changes should be
saved. Select OK to save or CANCEL to discard and return to main menu.
4.8.2.2 Inland Mode
Under inland mode, voyage configuration does not include PERSON setting. To set up number of
person on board, please go to INLAND SETTING/NUMBER OF PERSON.
By CONVOY EXTENSION, the dimensions of the vessel are set to the maximum rectangular size
of the convoy when operating in inland AIS mode.
Figure 55 Inland Voyage Setting
VOYAGE SETTING
20 13/01/17 22:43:39
Targets Received: 10
ETA [00/00 00:00]
CARGO <N/A or Harmless>
NAV.
<Under way using engine>
PERSON [0000]
DRAUGHT(m) [+00.0]
DESTIN [ ]
VOYAGE SETTING
20 13/01/17 22:43:39
Targets Received: 10
ETA [00/00 00:00]
CARGO <N/A or Harmless>
NAV.
<Under way using engine>
PERSON [0000]
DRAUGHT(m) [+00.0]
DESTIN [ ]
Save data?
YES NO
VOYAGE SETTING
2013/01/17 22:43:39
Dangerous Targets :0
DESTIN [ ]
ETA [00/00 00:00]
CARGO <N/A or Harmless>
NAV. <At anchor>
DRAUGHT(m) [15.00]
----------- CONVOY EXTENSION(m) -----------
BOW [010.0] STERN [020.0]
PORT [030.0] STARBOARD [040.0]
Port
Star-
board
Stern
Bow
IL
49
4.8.3 CPA/TCPA
In this submenu the closest point of approach (CPA) and time to CPA (TCPA) can be set. The
vessels with insufficient CPA and TCPA will be displayed in the dangerous list (see 4.7.7) and on
coastal and radar view.

CPA – in nautical miles
 TCPA – in minutes
 Alarm – when alarm is connected to the transponder via junction box, you can choose
whether alarm should be activated when a dangerous target appears.
Figure 56 CPA/TCPA
To save the settings, press
MENU
or
ESC
and the system will ask whether the changes should be
saved. Select OK to save or CANCEL to discard and return to main menu.
4.8.4 SET MMSI/IMO/ENI
This section is password protected and can only be accessed using the password (see 4.11.6).
4.8.4.1 SOLAS Mode
This submenu provides access to set MMSI and IMO . Use the knob to choose the menu option
either MMSI or IMO.
This function is for installation only
Figure 57
Set MMSI/IMO/ENI
CPA/TCPA
2013/01/17 22:43:39
Targets Received: 10
TCPA (min) [90]
ALARM <OFF>
CPA (NM) [95]
CPA/TCPA
2013/01/17 22:43:39
Targets Received: 10
TCPA (min) [90]
ALARM <OFF>
CPA (NM) [95]
Save data?
YES NO
SET MMSI/IMO/ENI
2013/01/17 22:43:39
Targets Received: 10
IMO [000000000]
MMSI [000000000]