46
4.7.8 MOB List
With the setup of MOB list, MOB can be easily traced by the person’s name not just by the MMSI
number on the MOB device. This submenu enables adding, removing, or modifying of MOB list
entries.
Figure 50
MOB List
In the list, press
FUNC
button will open the pop-up window with the question whether the selected
entry should be deleted, or to add a new entry to the list. After MMSI number and name are
assigned, press MENU or ESC to save or leave without saving.
The existing entry can be modified by pressing the knob to enter the text edit mode. Use the knob
to edit the list and press MENU or ESC to save or leave without saving.
4.7.9 Friend Ships
The users can easily recognize the friend ships on coastal view and radar view, when the list of
friend ships is set up. This submenu allows you to add, delete and edit the list of all registered
friend ships.
Figure 51
List of Friend Ships
In the list, press FUNC button will open the pop-up window with the question whether the selected
vessel should be deleted. After MMSI number and name are assigned, press MENU or ESC to
save or leave without saving.
The existing entry can be modified by pressing the knob to enter the text edit mode. Use the knob
to edit the list and press MENU or ESC to save or leave without saving.
MOB LIST
2013/01/17 17:04:38
TX POWER LEVEL: 12.5W
[000]-- ID ------ NAME --------------------------
MOB LIST
2013/01/17 17:04:39
TX POWER LEVEL: 12.5W
[000]-- ID ------ NAME --------------------------
DELETE
ADD NEW
FRIEND LIST
2013/01/17 22:44:22
Targets Received: 10
--- MMSI -------- SHIP NAME -------------------
211111211
TEST02
211111311
TEST04
211111411
TEST06
FRIEND LIST
2013/01/17 22:44:22
Targets Received: 10
--- MMSI -------- SHIP NAME -------------------
211111211
TEST02
211111311
TEST04
211111411
TEST06
Delete the item?
YES
NO
2111111211
47
4.8 Ship Setting
This menu list provides access to settings that are required during installation of the transponder.
There are a total of 5 submenus.
Figure 52
Ship Setting
4.8.1 Own Ship
This section is password protected and can only be accessed using the password (see 4.11.6).
The following information about the vessel should be correctly set up by installation prior to
operation:
Call Sign - Vessel radio call sign (limited to 7 characters)
Ship Name - limited to 20 characters
Ship Type – use the scroll wheel to select the type of vessel from the list
Position of internal GPS antenna - giving the location of the GNSS antenna connected to
the AIS transceiver (Internal GPS)
Position of external GPS antenna - giving the location of the GNSS antenna connected to
any external position source connected to the AIS transceiver
Length and Beam – measured length and width of the ship (inland mode only)
Figure 53
Ship Setting in SOLAS Mode (left) and Inland Mode (right)
Notice
: if Ship Type is Tanker, by regulation, whenever the ship navigation status is “Moored”, the
transponder’s transmission power is automatically changed to 1W for safety measures.
MENU
MESSAGES
NAV. STATUS
SHIP SETTING
TRANSCEIVER
SYS CONFIG
DIAGNOSTICS
MAIN MENU
OWN SHIP
VOYAGE
CPA/TCPA
SET MMSI/IMO/ENI
RETRY TIMES
AIS MODE
SHIP SETTING
2013/01/17 07:18:11
Dangerous Targets :0
SHIP SETTING
2013/01/17 22:43:39
SHIP NAME
[Orolia Ltd.
]
SHIP TYPE
<Pilot vessel>
INTERNAL ANT. POS. (m)
EXTERNAL ANT. POS. (m)
A
B
C D
A [000] B [000] C [00] D[00]
A [000] B [000] C [00] D[00]
CALL SIGN
[
2CJQ796
]
Dangerous Targets :10
SHIP SETTING
2013/01/17 22:43:39
SHIP TYPE <HSC>
---- Length and Beam (m) ----
---- INTERNAL ANT. POS.(m) ----
---- EXTERNAL ANT. POS.(m) ----
AI
BI
CI DI
Dangerous Targets :10
SHIP NAME [B ]
CALL SIG
[A ]
HINT: LS=AI+BI , BS=CI+DI
BI [000.0] CI [000.0]
BI [000.0] CI [000.0]
LS
[000.0] BS [000.0]
IL