manualshive.com logo in svg

McLaren MP4-12C, Руководство по обслуживанию, Страница: 43 / 292

Поделиться
Скачать
McLaren MP4-12C Скачать руководство пользователя страница 43

 

WARNING!

 

Risk of poisoning and injury when 
handling brake fluid!

Swallowing brake fluid can cause symptoms 
of poisoning such as headaches, dizziness, 
stomach pains, vomiting, diarrhoea, cramps 
and unconsciousness.
A dose of more than 100 cm3 can have fatal 
consequences.
Contact with brake fluid can cause serious 
skin damage to unprotected skin.
Wear safety glasses and protective clothing 
such as rubber gloves.

•

Ensure that brake fluid is only accessible 
to authorized personnel.

•

Store brake fluid in original containers 
only.

•

Only store brake fluid in suitable, 
appropriately marked containers.

•

Never put brake fluid in beverage 
containers.

Care 
Point:

Ensure brake fluid connections are 
clean and free from dirt and debris 
to avoid contamination.

Care 
Point:

Collect the brake fluid that 
emerges in a suitable container.

Care 
Point:

Close off the brake line with a 
suitable plug.

 

1.
  

Remove bolt (1). M5 x 12 5 Nm 

 

 

Care 
Point:

Replace Copper washers.

 

2.
  

Remove banjo bolt (2). M10 42 Nm 

 

3.
  

Remove bolts (3). M12 x 85 93 Nm 

 

4.
  

Remove caliper (4).

 

Detach brake caliper - Front

42

Содержание MP4-12C





































































































































































































































































































Отзывы:

Нет отзывов