manualshive.com logo in svg

McLaren MP4-12C, Руководство по обслуживанию, Страница: 154 / 292

Поделиться
Скачать
McLaren MP4-12C Скачать руководство пользователя страница 154

 

Care 
Point:

Filter cap torque figure is 
embossed on the cap. 25 Nm 

 

1
.

!

Replace both O-rings (7).

 

2
.

!

Replace washers on tank bolt (6).

 

3
.

!

Renew sump plug incl. washer (5).

 

4
.

!

Install plug and bolt in reverse order.

 

5
.

!

Install oil filter (9) and filter cap (4).

 

6
.

!

Remove oil filler cap (8).

 

 

Care 
Point:

Add no more than the specified 
quantity of oil to the tank at any 
one time.
Do not choke the filler tube with 
oil under any circumstances.

Care 
Point:

Do not put more than 6.8 litres of 
oil into the system. If this quantity 
has been achieved with no 
movement to the oil level gauge, 
please give the vehicle a 
complete check of the oil system 
including use of the McLaren 
Diagnostic System. Under no 
circumstances should the above 
mentioned quantity be exceeded.

 

7
.

!

Fill up engine oil slowly using a funnel. Mobil 
1 

–

 0W40 

 

8
.

!

Check oil level. AA-RM-04F02-01-007 - 
Check oil level 

 

 

Care 
Point:

Ensure oil filler cap is fitted 
correctly. The cap should align 
parallel with the vehicle (Front to 
back).

 

9
.

!

Install oil filler cap (8).

 

10
.  

Install components in reverse order.

 

153

Содержание MP4-12C





































































































































































































































































































Отзывы:

Нет отзывов