19
Download system log- This menu allows you to download the MX170’s system
log which provides detailed information about the performance of the MX170.
This can be helpful to service personnel in case of difficulties. Simply select
“Download system log” for a copy of the log.
For information on the Backup & Restore sub-menu see “Backup and
Restore” on page 22.
This sub-menu includes Backup, Restore, Factory Reset and Update software.
Dolby Atmos and Auro-3D Setup Examples
The system supports Dolby Atmos as well as Auro-3D. If Dolby Atmos material
is played in an Auro-3D setup, the system will try to match the Auro-3D specific
speakers to the nearest Dolby Atmos equivalent; the same goes for playing Auro-3D
material on a Dolby Atmos setup. The system will also handle hybrid setups with
both types of speakers.
DTS will work with a variety of setups including the Auro 3D setup below without
using the TOP speaker.
Figure 12– Auro-3D example: 11.1
Figure 13– Dolby Atmos Example: 7.1.4
If Dolby Atmos material is played on the above Auro-3D setup, the system will
match the speakers, so the LTF/RTF channels are played through the HL/HR
speakers and the LTR/RTR channels are played through the HLS/HRS speakers.
The HC and TOP speakers will not be used.
Dolby-enabled speakers
For Dolby Atmos setups, it is possible to add Dolby Enabled Speakers instead of
using top speakers mounted in the ceiling.
Dolby Enabled Speakers are extra speakers placed on top of or built into the
speakers on the main positions in the system (front, surround and rear surround).
These extra speakers fire sound upwards toward the ceiling. The sound is then
reflected to give the listener the sound from above without having actual top
speakers installed.
To add Dolby Enabled Speakers to your system, select the speakers which the
Dolby Enabled Speakers are associated with. For instance, if you have Dolby
Enabled Speakers on top of your front and surround speakers, go to the settings
for these speakers and activate the Dolby Enabled Speaker option. This will then
give you the option to select the size of the Dolby Enabled Speaker. Once this is
done, the system will find out which signal is to be routed for this speaker and
will add an Output for it.
Notice that playback of Auro-3D material will not make use of Dolby Enabled
Speakers.
If Auro-3D material is played on this setup, the system will play the HL/HR
channels through the LTF/RTF speakers and the HLS/HRS channels through the
LTR/RTR speakers. The LRS and RRS speakers will not be used.
Содержание MX170
Страница 27: ...27...