background image

12

the previous menu. 

Trim Select Knob

Now that you are familiar with the arrow, Back and 

Select buttons, you can change many settings using 

the Trim Select Knob. Turn the Trim Knob to access 

any of the following:
• 

Voicing

- There are seven built-in equalization 

settings. Use the up    and down   buttons to 

scroll through the choices.  You can push 

SELECT to choose and return to the previous 

screen or wait a few seconds and this will 

happen automatically. The built-in equalization 

settings are: Neutral (flat), Music, Music II, 

Relaxed, Tilt, Action, and Movie. You 

can edit existing voicings and add new ones in 

SETUP. Go to SETUP>Audio setup>Voicing 

setup and choose a voicing to edit or choose 

“Add” and create a new voicing with up to eight 

filters.

• 

Bass

- Use the up   and down   buttons to 

adjust the bass level between -12dB and +12dB 

in 0.5dB increments. The right   and left 

buttons set the upper adjustment limit between 

20Hz and 800Hz in 10Hz increments. The 

adjustment is saved for an individual Input. 

• 

Treble-

 Use the up/down      buttons to adjust 

the treble level between -12dB and +12dB in 

0.5dB increments. The right/left     buttons 

set the lower adjustment limit between 1,500Hz 

and 16,000Hz in 500Hz increments. The 

adjustment is saved for an individual Input. 

• 

VFD Level

- Use the up/down     buttons to set 

the brightness level of the VFD (Vacuum 

Fluorescent Display). The default for the 

information display is 100% which can be 

changed to 25%, 50% or 75%.

• 

Lip Sync

- This trim adjustment allows the 

timing of the audio to be adjusted for 

synchronization to video. Use the up/down     

arrows for 5ms increments and the right/left   

 buttons for 25ms increments up to a total of 

500ms.

• 

AMP Light

- This allows for the meter lights, of 

a McIntosh amplifier connected with a power 

control cable, to be toggled on and off using the 

up   and down   buttons.

• 

Trim Center

- This trim adjustment allows for 

the adjustment of the Center Channel volume 

level relative to the Front and Surround 

Channels. Use the up/down     buttons to 

adjust from -10dB to + 10dB in 1dB increments.

• 

Trim Center

- This trim adjustment allows for 

the adjustment of the Center Channel volume 

level relative to the Front and Surround 

Channels. Use the up/down     buttons to 

adjust from -10dB to + 10dB in 1dB increments. 

Any adjustment will be lost when the Input is 

changed.

• 

Trim Surrounds

- This trim adjustment allows 

for the adjustment of the Surround Channels 

volume level relative to the Front, Center and 

LFE Channels. Use the up/down     buttons to 

adjust from -10dB to + 10dB in 1dB increments.

• 

RoomPerfect™ 

- The RoomPerfect™  room 

correction process (“RoomPerfect™  Setup” on 

page 22) can generate correction settings for 

up to four Focus positions as well as a more 

general Global setting. This trim setting allows 

quick access to change between various saved 

settings or to Bypass RoomPerfect™  

altogether. Use the up/down     buttons to 

scroll through all saved settings.

Surround Mode Knob

The MX170 provides eleven different default 

Surround Modes. These modes include upmixing 

options such as DTS NEO X which will create up to 

11.1 channel surround from sources like 5.1 and 7.1 

surround signals or even from stereo signals. Dolby 

restricts the upmixing of Dolby signals to Dolby 

upmixer. Non-Dolby upmixer choices will have no 

effect on a Dolby source. Therefore, Dolby upmixer 

should be selected for all Dolby upmixing, and will 

work on non-Dolby signals as well. The MX170 

Surround Processing Modes are:

•  None

•  Dolby Upmixer

•  Neural:X

•  Auro-3D/Auromatic

•  Auro-2D

•  Auro-Stereo

•  Auro-Native (as recorded)  

•  Virtual-X

•  Legacy (see below)

•  Stereo (This will downmix the signal)

•  Party

The Legacy Mode will pass older non-Auro, non-

DTS:X, non-Atmos formats with no height or 

object oriented content without upmixing. This 

content may include Dolby TrueHD, Dolby Digital, 

Multichannel PCM, DTS Master Audio, as well as 

stereo and surround formats up to 7.1.

Below are speaker configurations for Auro-3D and 

Dolby Atmos. If Dolby Atmos material is played 

in an Auro-3D setup, the system will try to match 

the Auro-3D specific speakers to the nearest Dolby 

Atmos equivalent; the same goes for playing Auro-

3D material on a Dolby Atmos setup. The system 

will also handle hybrid setups with both types of 

Содержание MX170





























Отзывы: