15
Enabling Natural roll-off (choosing “Yes”) will
send the full range signal to the speaker as well as
sending the bass frequency based on the cutoff to a
subwoofer or XXL speaker.
Enabling bi-amping (choosing “Yes”) will send an
exact copy of the existing signal to a pair of AUX
Outputs. This option is only available for the LF/RF
speakers.
Add each speaker you have by selecting the
+
by
appropriate description and filling in the data. The
speaker will be assigned to an Output.
Speaker Types for Setup
Position
Description
L
Left
C
Center
R
Right
Sub L
Subwoofer Left
LW
Left Wide
RW
Right Wide
SUB R
Subwooofer Right
SUB LFE
Subwoofer Low
Frequency Effects
HL
Height Left
HC
Height Center
HR
Height Right
LTF
Left Top Front
RTF
Right Top Front
HLS
Height Left Surround
LTM
Left Top Middle
TOP
Top Ceiling/Voice of
God
RTM
Right Top Middle
Position
Description
HRS
Height Right Surround
LS
Left Surround
LTR
Left Top Rear
RTR
Right Top Rear
HLR
Height Left Rear
HRR
Height Right Rear
SUB LR
Subwoofer Left Rear
LRS
Left Rear Surround
CB
Center Back
RRS
Right Rear Surround
SUB RR
Subwoofer
Right Rear
Verify Speakers
SETUP>Speakers & room>Verify speakers
Select “Verify speakers” to step through each
connected speaker. Sound should be heard from
the current speaker. Select “Next” or “Previous” to
cycle through available speakers.
Adjust Subwoofer Level
SETUP>Speakers & room>Adjust Sub
The Adjust Sub menu is a tool for setting the level
for an attached subwoofer. It will compare the
level of the Front Left speaker and the subwoofer.
It will then suggest changes to make on the level
adjustment for a powered sub.
To use this tool, attach the included microphone and
cable to the MIC jack in the rear of the MX170 and
position the microphone in the primary listening
location. Select start and follow the prompts.
It is advisable to perform the sub adjustments prior
to using RoomPerfect™ . RoomPerfect™ will
perform fine tuning of your system, but it is better to
manually set your preferred overall subwoofer level
as opposed to using equalization to accomplish this.
RoomPerfect™
RoomPerfect™ is an advanced calibration and
adjustment system that will get the most out of your
system. For setup instruction see “RoomPerfect™
Setup” on page 22.
Channel Gain
SETUP>Speakers & room>Channel gain
Channel gain allows for full range (20Hz-20kHz)
adjustments of gain by channel. Changes can be
made for each saved RoomPerfect™ setting
including Global and Bypass.
• Choose “Edit” to make changes
• Choose the RoomPerfect™ settings you wish
to adjust
• Settings can be changed for Dolby Atmos/
DTS and for Auro signals
• Choose “Save” to keep the new settings or
cancel to lose your changes
If you wish to make gain adjustments that are not
full range (so as to not effect a sub playing that
channel for instance), use Speaker Setup (page
14) instead.
Audio Setup
The Audio setup menu consists of two sub menus:
Audio Processing and Voicing setup.
Audio Processing
SETUP>Audio setup>Audio processing
This menu allows for management of the audio
processing presets for DTS, AURO and Dolby.
Содержание MX170
Страница 27: ...27...