McIntosh MVP891, Руководство пользователя

Страница: 27 / 40

27
button to select the CD Layer (or Multi Layer/Stereo
Layer). Press the PLAY Push-button, after the disc
tray closes the MVP891 will read the selected layer
and the disc starts to play. Refer to figures 30, 32 and
33.
Note: The next SACD disc played will default to the
SACD Multichannel layer or the SACD Stereo
layer if a Multichannel layer is not present on the
disc.
How to Play a CD Disc
With a disc already loaded into the MVP891, press
the
„
(Play) Push-button on the Front Panel of the
MVP891 or Remote Control. Refer to figures 30 and
32.
How to Pause a Disc
This feature allows the temporary stopping of disc
playback. Refer to figures 30, 32 and 33.
1. When playing a Disc, press the
;
(Pause) Push-
button to temporarily stop playback.
Note: After the Pause Feature is activated, with a
DVD-Video Disc in the MVP891, each ad-
ditional press of the
;
(Pause) Push-button
will permit the video to advance one frame at a
time.
2. Press the
„
(Play) Push-button to cancel pause
and resume playing the disc.
DVD-Video Rapid Frame Advance
The MVP891 allows for rapid scanning of Blu-ray and
DVD Video Frames both forward or backward direc -
tions at different speeds.
1. When a disc is playing,
press the
;
(Pause)
Push-button to stop
playback.
read the increase in disc data before playback
will occur.
How to Play a BD or DVD Disc
With a disc already loaded into the MVP891, press
the
„
(Play) Push-button on the Front Panel of the
MVP891 or the Remote Control. Refer to figures 30
and 32.
Notes: 1. When a Blu-ray, DVD Video or Audio Disc
is first started, the Disc’s On-Screen Menu
will usually appear allowing for the choice of
selections and various Audio/Video Playback
Parameters.
2. When the MVP891 is connected to a HDTV not
compatible with Blu-ray 3D Discs, an error
message will appear On-Screen.
How to Play a SACD Disc
With a disc already loaded into the MVP891, press
the
„
(Play) Push-button on the Front Panel of the
MVP891 or Remote Control. The Disc will start
playing the first selection of the SACD Layer; this
could be either the Multichannel or 2-Channel Tracks
depending on the disc contents. By pressing the DISC
LAYER Push-button once, the Front Panel Informa -
tion Display will momentarily display the current
layer playing.
To change from the Multichannel Layer to the
SACD 2-Channel while the disc is playing, press the
DISC LAYER Push-button once to display the cur -
rent layer “MULTI” and then press the DISC LAYER
Push-button a second time to select the “STEREO”
Layer.
To change from the Multichannel or Stereo Layer
to the CD Layer (or back again), first stop the disc
from playing. Press the OPEN/CLOSE Push-button to
open the tray and then press the DISC LAYER push-
Figure 32
HOME
How to Operate the MVP891
2. Press the
8
(Fast For-
ward) or
7
(Reverse)
Push-button to activate
the Rapid Frame Advance.
Note: If the Fast Forward
or Reverse Push-but-
ton is pressed sev-
eral times, the speed
of the Frame Ad-
vance will increase.
An On-Screen Icon
will appear during
the Rapid Frame
Advance Mode indi-
cating the advanced
speed.
3. To cancel the Rapid Frame
Advance Feature press the
„
(Play) Push-button.
Back Track/Chapter
Return back to the beginning
of the Track/Chapter currently
playing by momentarily press-
ing the
9
(Back) Push-button
on the MVP891. Repeated
momentary presses of the
9
(Back) Push-button will
allow for rapid selection of
the desired previous Tracks/
Chapters.
Figure 33