11
Rear Panel Connectors
Connect the
MVP891 power cord
to a live AC outlet.
Refer to information
on the back panel
of your MVP891 to
determine the correct
voltage for your unit
COAXIAL DIGITAL
AUDIO OUTput sends
signals to a Control Center
with a D/A Converter or a
decoder
Y OUTPUT connects to the Y Component Input of
the TV/Monitor or other video component.
P
B
/C
B
OUTPUT connects to the P
B
/C
B
Component
Input of the TV/Monitor or other video component.
P
R
/C
R
OUTPUT connects to the P
R
/C
R
Component
Input of the TV/Monitor or other video component
HDMI OUT supplies digital
video and digital audio sig-
nals to an Input of an A/V
Control Center or other au-
dio/video component
POWER CONTROL IN
receives turn-on signals from
a McIntosh component and
POWER CONTROL OUT
sends turn-on signals on to
another McIntosh Component
IR INput for
connecting an
IR Receiver
DATA IN receives
operating data
from a McIntosh
Control Center
RS-232C connector
for connection to
a remote control
device
VIDEO OUTput supplies
video signals to connect
to a Composite Input of
an A/V Control Center or
other video component
UNBALANCED AUDIO
OUTPUTS supply Seven
Point One Channels of ana-
log audio and connects to
the 7.1 CH Input of an A/V
Control Center
UNBALANCED
AUDIO OUTPUTS
supply Two Channels
of Analog Audio and
connects to the Analog
Input of an A/V Con
-
trol Center
BALANCED AUDIO
OUTPUTS supply two
channels of analog audio
to connect to Balanced In
-
puts of other components
ETHERNET
Network Connector
for connecting
the MVP891 to a
Broadband Ethernet
Network
