background image

4

Introduction

Performance Features

Introduction and Performance Features 

The McIntosh D1100 Digital Preamplifier is one of the 

finest Preamplifiers ever created with connections for 

digital sources. The D1100 Outputs have the ability to 

drive multiple Power Amplifiers. The D1100 reproduc-

tion is sonically transparent and absolutely accurate. 

The McIntosh Sound is “The Sound of the Music 

Itself.”

• Electromagnetic Output Switching 

Digital Logic Circuits drive Electromagnetic Switches 

for the Balance and Unbalanced Outputs 1 and Out-

puts 2 for reliable, noiseless, distortion free switching.

• Digital Audio Inputs

The Digital Inputs decode PCM and DSD Signals 

from external sources. Coaxial, Optical, BNC and 

AES/EBU Inputs process Digital Signals up to 

192kHz with 24-Bit resolution. The Digital MCT In-

put Circuitry directly decodes SACD/CD signals from 

an external Transport component. The USB Input 

for streaming audio processes Digital Signals up to 

384kHz with 32-Bit resolution, decodes up to DSD256 

Digital Signals and DXD 24-Bit with a sampling rate 

up to 384kHz. 

• Dual Operating Modes

The D1100 has two modes of operation. One mode is 

as a high performance full function Digital Pream-

plifier. The second mode is as a high performance 

Digital to Analog Converter (DAC) which integrates 

with an Analog only Preamplifier via a special Digital 

Control Interface.

• Precision Tracking Volume Control

Volume levels are controlled by a Precision Balanced 

Digitally Controlled Attenuator System with an Opti-

cal Encoder Rotary Control. This assures a 0.1dB 

tracking accuracy between channels. There are 214 

individual 0.5dB volume level steps with no noise as 

the volume level is changed.

• Variable Rate Volume and Balance Controls

The D1100 Preamplifier’s Volume and Balance Con-

trol Circuitry provides an ideal rate of change with 

control rotation.

• HXD

®

 for Headphones

The D1100 Headphone Crossfeed Director Circuitry 

(HXD

® )

 

improves the sound localization for Head-

phone Listening. HXD

TM 

restores the directionality 

component of the spatial sound stage normally heard 

with Loudspeaker listening.

• Alphanumeric Fluorescent Display

The Front Panel Information Display indicates the 

Source Selection, Volume/Balance Levels and Setup 

Mode Selections. The display intensity is adjustable.

• Remote Control with External Sensor Input

The Remote Control provides control of the D1100 

operating functions and McIntosh Source Components 

connected to it. Enjoy your McIntosh System from 

another room in your home by connecting an external 

sensor.

• Power Control Output and Trigger Assignment

A Power Control connection for convenient Turn-On 

of McIntosh Power Amplifiers, Source Components 

and Accessories is included. The Power Control Trig-

ger Ouputs may be assigned to activate when a given 

Input/Output is selected.

• Dual Special Power Supply

Two fully separate and regulated Power Supplies with  

special R-Core Power Transformers ensure stable 

noise free operation even though the power line varies.

• LED Front Panel Illumination

The even Illumination of the Front Panel is accom-

plished by multiple extra long life Light Emitting 

Diodes (LEDs) arranged with a special orientation.

• Glass Front Panel and Super Mirror Chassis

Finish

The famous McIntosh Illuminated Glass Front Panel 

and the Stainless Steel Chassis with Super Mirror 

Finish ensures the pristine beauty of the D1100 will be 

retained for many years.

HXD

®

 is a registered trademark of McIntosh Laboratory, Inc.

Содержание D1100





























Отзывы: