McIntosh D1100, Руководство пользователя

Страница: 15 / 28

15
The D1100 Default Setting for using Headphones is to
automatically mute all the Output Connectors when
the Headphone Cable Plug is inserted into the D1100
Front Panel HEADPHONES Jack. There are two
available settings:
Mute All Outputs
Mute No Outputs
6. Rotate the INPUT Control until “SETUP: HEAD-
PHONES, Mute All Outputs ” appears on the
Information Display. Refer to figure 28.
7. Rotate the VOLUME (ADJUST) Control to change
the current HEADPHONES setting from “Mute
All Outputs” to either “Mute Main Output” or
“Mute No Outputs”. Refer to figures 28 and 29.
8. Exit the SETUP Mode by several presses of the
INPUT Control.
20. To save the new name, press and hold in the IN-
PUT Control until “SETUP: MEDIA SERVER ,
ON / Rename” appears on the Front Panel Infor-
mation Display. Refer to figure 17.
21. Exit the SETUP Mode by several presses of the
INPUT Control.
Note: For convenience, an “Input Assignment Chart”
on a separate sheet “Mc5A/5B” has been pro-
vided to keep track of changes.
Figure 14
RENAME: OPTI 1
>MEDIA S <
Figure 13
RENAME: OPTI 1
>MEDIA <
The Output Settings provide the ability to change how
the D1100 Output 1, Output 2 and Headphones func-
tion.
OUTPUT 1 and 2:
By defaut OUTPUT 1 and 2 are set to go On/Off by
using the Front Panel OUTPUT 1 and 2 Push-buttons
or by using the OUTPUT 1 and 2 Push-buttons on the
Remote Control. If it is desirable to have OUTPUT 1
and/or 2 always On, regardless of the OUTPUT 1 and
2 Push-button settings, perform the following:
1. Press and hold in the INPUT Control to enter the
SETUP MODE. Refer to figure 2 on page 13.
2. Rotate the INPUT Control until “SETUP: Out-
puts, (Hold INPUT)” appears on the Information
Display. Refer to figure 23.
3. Press and hold in the INPUT Control until
“SETUP: OUTPUT 1, Switched” appears on the
Display. Refer to figure 24.
4. Rotate the VOLUME (ADJUST) Control to change
from the “Switched” setting to “Unswitched”.
Refer to figure 25.
5. In a similar manner, perform steps 3 and 4 to
change the OUTPUT 2 setting. Refer to figures 26
and 27.
Setup, con’t
Figure 15
RENAME: OPTI 1
>MEDIA SV <
Figure 16
RENAME: OPTI 1
>MEDIA SVR <
Figure 17
SETUP: MEDIA SVR
On/Name (Hold INPUT)
Output Settings
Figure 23
SETUP: Outputs
(Hold INPUT)
Figure 25
SETUP: OUTPUT 1
Unswitched
Figure 24
SETUP: OUTPUT 1
Switched
Figure 27
SETUP: OUTPUT 2
Unswitched
Figure 26
SETUP: OUTPUT 2
Switched
Figure 28
SETUP: HEADPHONES
Mute All Outputs
Figure 29
SETUP: HEADPHONES
Mute No Outputs