McIntosh CR12, Руководство пользователя

Страница: 11 / 20

11
CR12 Front Panel Displays, Push-Buttons and
Switch
20
CR12 Front Panel Displays,
Push-Buttons and Switch
Allows you to
disable control
operations of
accessory com-
ponents in any
zone
Program an ac-
cessory turn on
command when
that source is
selected
LED is on when the AC
power cord is connected
to a live AC outlet, and
the front panel POWER
switch is turned to ON
The LED Displays
indicate what signal
sources have been
selected for each
zone
Mutes or unmutes
audio in any zone
that is turned on
Select the zone you
wish to program
Turns all AC
power on or off
Resets all CR12
microprocessors
Select any one of the Audio
or Audio/Video signal
sources for use in any zone
Turns off the entire
McIntosh Audio/
Video System
Program a start
playing com-
mand when that
source is se-
lected
The digital display indi-
cates the % (Percent) of
the maximum volume for
the zone selected. After 10
seconds the display reverts
to the volume setting for
Zone 1
Adjust the volume
level up or down in
any zone
Turns on or off a
specific zone to
operate or to allow
programming
The LED indicates
if the mute func-
tion is active for
the zone selected
The LED’s indi-
cate which zones
are turned on
IR Sensor receives
commands from a
remote control
The LED’s indicate
which zones are in the
programming mode
The LED indicates if the
zone selected has the ac-
cessory control off com-
mand programmed
The LED indicates if
the zone selected has
the accessory on com-
mand programmed
The LED indi-
cates if the zone
selected has the
transport play
command pro-
grammed