McIntosh CR12 Скачать руководство пользователя страница 10

Страница: 10 / 20

How to Connect the CR12

in a Stand Alone System

How to Connect the CR12 in a Stand Alone

System

McIntosh PC-3

To AC Outlet

McIntosh LD Player

123456789

Left

Loudspeaker

Right

Loudspeaker

Zone 1 Room

McIntosh

Keypad

Monitor/TV

To PC-3

AC Outlets

McIntosh Tuner

Dedicated Zone

Source Component

To PC-3 AC

Outlet

McIntosh Multi-Channel Amplifier

To Second

CR12

To Second CR12

To PC-3

AC Outlets

McIntosh CD Player

1. Connect the CR12 power cord to a live AC outlet.

2. Connect a McIntosh Power Controller to the CR12 us-

ing either the Din or Pwr Ctl (power control) connector

and connect zone amplifier power cords to the appro-

priate outlets on the Power Controller.

3. Connect a McIntosh multi channel amplifier with a

DB25 computer type cable from the CR12 Multi-Chan-

nel Amp connector to amplifier input connector.

Note: Both audio and zone power control pass through this

cable. Discrete zone audio cables may also be used,

either balanced or unbalanced. Refer to Page 5 for the

Din plug balanced terminal connections. Also connect a

cable from the CR12 Din Multi-Channel Amp connector

to the matching connector on the amplifier to provide

zone power control.

4. Connect a WK-3/WK-4 keypad, using 4 conductor

shielded cable to a zone keypad terminal connector or

connect a WK-2 keypad or R649 wall sensor to a zone

sensor connector with RG6 or RG59U coax cable.

5. Connect the video outputs of A/V source components to

the CR12 video inputs and audio outputs to CR12 au-

dio inputs.

6. For dedicated zone source components, connect their

Audio, Video and Data outputs to the CR12 Zone Aux

In connectors.

Note: The A/V source signals used in a dedicated zone replace

the front panel Aux signal source selection and are

automatically switched when a plug is inserted into the

Data port. If no data cable is used, insert 1/8 inch mini

Stereo phone plug, (with a lead connected from the tip to

the ring), into the Data port to activate the switching.

7. Connect the outputs of audio source components to the

CR12 audio inputs.

8. Connect the Video Out to Mon to the Video input of a

remote zone TV or monitor.

Содержание CR12





















Результаты поиска

Содержание CR12

Отзывы:

Похожие инструкции для CR12

Бренды по названию

Популярные бренды

McIntosh CR12, Руководство пользователя

Результаты поиска

Содержание CR12

Отзывы:

Похожие инструкции для CR12

Бренды по названию

Популярные бренды