background image

2

T

he lightning flash with arrowhead, within an equilateral triangle, 

is intended to alert the user to the presence of uninsulated “dan-

gerous voltage” within the product’s enclosure that may be of suf-

ficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to 

alert the user to the presence of important operating and mainte-

nance (servicing) instructions in the literature accompanying the 

appliance.

ATTENTION:

RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR

WARNING - TO REDUCE RISK OF 

FIRE OR ELECTRICAL SHOCK, DO 

NOT EXPOSE THIS EQUIPMENT TO 

RAIN OR MOISTURE.

NO USER-SERVICEABLE PARTS INSIDE. RE-

FER SERVICING TO QUALIFIED PERSONNEL.

To prevent the risk of electric shock, 

do not remove cover or back. No 

user-serviceable parts inside.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, 

heat registers, stoves, or other apparatus (including 

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades 

with one wider than the other. A grounding type plug 

has two blades and a third grounding prong. The wide 

blade or the third prong are provided for your safety. 

If the provided plug does not fit into your outlet, 

consult an electrician for replacement of the obsolete 

outlet.

10. Protect the power cord from being walked on or 

pinched particularly at plugs, convenience receptacles, 

and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the 

manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table 

specified by the manufacturer, or sold with 

the apparatus. When a cart is used, use 

caution when moving the cart/apparatus 

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when 

unused for long periods of time.

14. Refer all servicing to qualified service personnel. Ser-

vicing is required when the apparatus has been dam-

aged in any way, such as power-supply cord or plug is 

damaged, liquid has been spilled or objects have fallen 

into the apparatus, the apparatus has been exposed 

to rain or moisture, does not operate normally, or has 

been dropped.

15. Do not expose this equipment to dripping or splashing 

and ensure that no objects filled with liquids, such as 

vases, are placed on the equipment.

16. If this equipment is supplied with a power supply cord 

only, the mains plug of the power supply cord shall 

remain readily operable. To completely disconnect 

this equipment from the a.c. mains remove the plug 

from the a.c. receptacle.

Si l’équipement est uniquement alimenté par un cor-

don d’alimentation, la fiche du cordon d’alimentation 

doit demeurer aisément accessible.   Pour déconnecter 

complètement l’équipement du réseau d’alimentation, 

déconnecter la fiche du cordon d’alimentation de la 

prise murale.

17. If this equipment is supplied with AC /DC Adapter 

with separate power supply cord or the AC/DC 

Adapter plugging directly into an a.c. receptacle, they 

shall remain readily operable. To completely discon-

nect this equipment from the a.c. mains remove the 

AC /DC Adapter mains power supply cord from the 

a.c. receptacle or remove the AC /DC Adapter when it 

is directly plugged into the a.c. receptacle.

Si l’équipement est alimenté par un adaptateur AC/DC 

munis d’un cordon d’alimentation ou un adaptateur 

AC/DC qui est alimenté directement à la prise murale, 

ils doivent demeurer aisément accessibles. Pour 

déconnecter complètement l’équipement du réseau 

d’alimentation, déconnecter l’adaptateur AC/DC de la 

prise murale ou déconnecter le cordon d’alimentation 

de l’adaptateur AC/DC de la prise murale.

18. WARNING: Do not expose batteries or battery pack to 

excessive heat such as sunshine, fire or the like.

AVERTISSEMENT: Les batteries ou bloc de batteries 

ne doivent pas etre exposees a une chaleur excessive 

telle que celle du soleil, feu ou autre source de chaleur 

similaire.

19. CAUTION: danger of explosion if battery is incorrect-

ly replaced. Replace only with the same or equivalent 

type.

ATTENTION: danger d’explosion si la pile n’est pas 

remplacée correctement. Ne remplacer que par le 

même type ou un type équivalent.

20. Connect mains power supply cord only to a mains 

socket outlet with a protective earthing connection.

IMPORTANT SAFETY

INSTRUCTIONS!

   PLEASE READ THEM BEFORE

   OPERATING THIS EQUIPMENT.

Содержание C52

































Отзывы: