12
4. Rotate the
SELECT 1 Control
or use the Remote
Control ◄INPUT► push-button until the display
indicates “TRIM CD 0.0”.
5. Rotate the SELECT 2 Control or use the Remote
Control LEVEL
q
or
p
Push-buttons until Lis-
tening Volume Level of the CD Input is the same
as the Tuner Volume Level. The figure 5 illustra-
tion indicates a -2.5dB decrease in the CD Level.
6. Rotate the SELECT 1 Control until the name of
the next Input to be adjusted is displayed.
7. Repeat steps 5 and 6 until all the Inputs with
sources connected to the C2300 have the same
relative volume levels when switching between
them. Record any changes made to the various in-
puts from the default settings in the “Input Source
Settings” chart below.
8. Press the SETUP Push-button to exit the Setup
Mode.
Input Source Settings
Default Title
New Title
Trim
Trigger
TUNER
DVD
D/A
CD
CDR
SERVER
MC PHONO
MM PHONO
Figure 5
Re-Title Inputs
The C2300 provides the ability to change the default
Input Titles to match the components in your system.
In the following example the CDR Input will be re-
named and appear as AUX on the Front Panel Alpha-
numeric Display.
Notes: 1. One of the high level Inputs may be renamed
to AUX or swiched Off. If any input is switched
Off its name will no longer appear on the Front
Panel Alphanumeric Display when using the
INPUT Control, nor is it accessible with the
Remote Control.
2. When a high level input is switched Off its name
will become available to the remaining high
level inputs.
3. The Phono MC and Phono MM Inputs are
designed for connection of a turntable only and
thus the title is not changeable. However, the
Phono Input may be switched Off.
1. Press the SETUP Push-button to access the Setup
Mode.
2. Rotate the MENU Control until “INPUT 3
â
TUN” appears on the Front Panel Alphanumeric
Display.
3. Rotate the SELECT 1 Control until “INPUT 7
â
CDR” appears on the Front Panel Alphanumeric
Display. Refer to figure 6.
4. Rotate the SELECT 2 Control until the Front
Panel Alphanumeric Display indicates “INPUT 7
AUX”. Refer to figure 7.
5. Press the SETUP Push-button to exit the Setup
Mode.
Meter Illumination On/Off
The Front Panel Meter Illumination may be switched
On or Off. Follow the steps below to switch the Meter
Illumination Off.
1. Press the SETUP Push-button to access the Setup
Mode.
2. Rotate the MENU Control until the words ME-
TER ON appears.
3. Rotate the SELECT 2 Control until the Front
Panel Alphanumeric Display indicates “METER
OFF”.
4. Press the SETUP Push-button to exit the Setup
Mode.
Figure 6
Figure 7
Power Control Triggers
The OUTPUT 1(A) and OUTPUT 2(B) Power Control
Outputs are reassignable to activate only when a given
Input is selected. In the following example, the Power
Control OUTPUT 1(A) Jack will be set to function as
TRIGGER A for the DVD Input.
1. Press the SETUP Push-button to access the Setup
Mode.
Display Brightness
The Front Panel Alphanumeric DISPLAY Brightness
may be varied from a setting of 1 (Dim) to 7 (Bright).
Follow the steps below for reducing the Display
Brightness.
1. Press the SETUP Push-button to access the Setup
Mode.
2. Rotate the MENU Control until the word DIS-
PLAY 7 appears.
3. Rotate the SELECT 2 Control until the Front Panel
Alphanumeric Display indicates “Display 3”.
4. Press the SETUP Push-button to exit the Setup
Mode.
Trim Level Adjustment, con’t
