McElroy Pit Bull 250 Скачать руководство пользователя

Страница: 3 / 56

Introduction

Thank you for purchasing this McElroy product.

The McElroy Pit Bull® close quarter hydraulically operated fusion

machine is designed to be used in-ditch or above ground and is

easily moved by two operators.
The Pit Bull 28 model fuses 2" IPS (63mm) minimum to 8" DIPS

(225mm) maximum pipe.
The Pit Bull 250 model fuses 2" IPS (63mm) minimum to 250mm

maximum pipe.
The Pit Bull 412 model fuses 4" IPS (110mm) minimum to 12"

DIPS (340mm) maximum pipe.
The Pit Bull 618 model fuses 6" IPS (180mm) minimum to 18" OD

(450mm) maximum pipe.
The Pit Bull 500 model fuses 6" IPS (180mm) minimum to 20" OD

(500mm) maximum pipe.
Each fusion machine consists of:
1)

Heater

2) Facer and Facer Stand

3) Carriage Assembly

Required and sold separately are:

1) Hydraulic Power Unit (HPU)

2) Hydraulic Hoses

With reasonable care and maintenance, this machine will give years of satisfactory service.
Before operating this machine, please read this manual thoroughly, and keep a copy with the machine for future

reference. This manual is to be considered part of your machine. A replacement manual can be obtained online at:

www.mcelroy.com

TX02264-3-8-04

3-18-0

McElroy University

For more than 30 years, McElroy has been the only

pipe fusion machine manufacturer to continuously

offer advanced training. Course offerings are meant to

enhance your efficiency, productivity and safety in the

proper use of McElroy machines. McElroy University

classes are structured so that the skills learned and the

machines used in each class closely match the machines

found on pipelining jobsites. We offer training at

our facility or yours. Our uniquely qualified McElroy

University course instructors offer years of industry

experience.
Tuition for each course includes lunches, course materials

and a certificate of completion. Online registration,

as well as up-to-date course offerings and dates, is

available at

www.mcelroy.com/university

This manual is intended as a guide only and does not

take the place of proper training by qualified instructors.

The information in this manual is not all inclusive and

can not encompass all possible situations that can be

encountered during various operations.

MU2

-0

3-13-14

TX04659-03-24-14

Содержание Pit Bull 250

























































Результаты поиска

Содержание Pit Bull 250

Отзывы:

Похожие инструкции для Pit Bull 250

Бренды по названию

Популярные бренды

McElroy Pit Bull 250, Руководство оператора

Результаты поиска

Содержание Pit Bull 250

Отзывы:

Похожие инструкции для Pit Bull 250

Бренды по названию

Популярные бренды