McElroy Pit Bull 250, Руководство оператора

Страница: 21 / 56

Operation
3 - 3
Install Clamping Inserts
Select and install appropriate clamping inserts for the pipe that is
being fused.
Clamping inserts are required for all sizes except sizes that match
the size of the jaw without inserts.
TX02956-4-15-09
PH00
30
4-9-
24
-9
3
Prepare Heater
Heater is not explosion proof. Operation of
heater in an explosive atmosphere without
necessary safety precautions will result in serious
injury or death.
If operating in an explosive atmosphere, heater should be brought
up to temperature in a safe environment, then unplugged before
entering the explosive atmosphere for fusion.
Install butt fusion heater plates while heater is cool.
NOTICE: The heater should never be used without butt fusion
heater plates installed. Refer to the "Maintenance" section of this
manual for installation procedure.
Place heater in insulated heater stand.
Plug heater into a proper power source.
Refer to the "Maintenance" section of this manual for instructions
how to adjust heater temperature.
Allow heater to warm-up to operating temperature.
TX04383-05-06-14
PH
02
68
5-
3-8-0
4
¡PELIGRO!
PH
03
87
4-
4-15-0
9