McElroy Pit Bull 250, Руководство оператора

Страница: 35 / 56

Remove Carriage Assembly from Ditch
Loosen clamp knobs and remove top jaws.
Rotate carriage assembly from under the pipe.
IMPORTANT: Always rotate unit with valve system facing up to
protect against damage.
Attach sling to lifting point(s).
Lift carriage assembly from ditch.
TX00451-9-16-94
Make Fusion Joint
Refer to the "Butt Fusion Procedure" for operating instructions.
After facing operation, remove the facer from ditch.
TX00450-9-16-94
Special Operations - In Ditch
PH00
36
3-9-12
-9
4
4 - 7
CD0019
3b-9-
29-00
Reassemble Carriage and Facer
Lift facer into position and bolt to facer mount. Do not tighten. Pivot
facer down and bring jaws inward against the facer to establish
facer position. Open jaws away from facer and pivot facer out.
Tighten the facer mounting bolts.
Replace top jaws.
TX02294-3-8-04
Attach Hydraulic Hoses
There are four hydraulic hoses that connect the facer and the
carriage to the hydraulic power unit. The unit must be off to
connect or disconnect the hoses.
Connect the 3/8" quick disconnects on the hydraulic power unit to
the facer and the 1/4" quick disconnects to the carriage.
TX02270-3-8-04
PH019
08-11-15-00
PH019
07
-11-15-00