McElroy In Field Скачать руководство пользователя страница 4

Warranty

LIMITED WARRANTY

McElroy Manufacturing, Inc. (McElroy) warrants all 

products manufactured, sold and repaired by it to be 

free from defects in materials and workmanship, its 

obligation under this warranty being limited to repairing 

or replacing at its factory and new products, within 

years

 after shipment, with the exception of purchased 

items (such as electronic devices, pumps, switches, etc.), 

in which case that manufacturer’s warranty applies. 

Warranty applies when returned freight is prepaid and 

which, upon examination, shall disclose to have been 

defective. This warranty does not apply to any product 

or component which has been repaired or altered by 

anyone other than McElroy or has become damaged 

due to misuse, negligence or casualty, or has not been 

operated or maintained according to McElroy’s printed 

instructions and warnings. This warranty is expressly in 

lieu of all other warranties expressed or implied. The 

remedies of the Buyer are the exclusive and sole remedies 

available and Buyer shall not be entitled to receive any 

incidental or consequential damages. Buyer waives 

the benefit of any rule that disclaimer of warranty shall 

be construed against McElroy and agrees that such 

disclaimers herein shall be construed liberally in favor of 

McElroy.

RETURN OF GOODS

Buyer agrees not to return goods for any reason except 

upon the written consent of McElroy obtained in advance 

of such return, which consent, if given, shall specify the 

terms and conditions and charges upon which any such 

return may be made. Materials returned to McElroy, for 

warranty work, repair, etc., 

must have a Return Material 

Authorization (RMA) number

, and be so noted on the 

package at time of shipment. For assistance, inquiry shall 

be directed to:
McElroy Manufacturing, Inc.

P.O. Box 580550

833 North Fulton Street Tulsa, Oklahoma 74158-0550
PHONE: (918) 836–8611, FAX: (918) 831–9285. 

EMAIL:  [email protected]

Note:

  Certain repairs, warranty work, and inquiries may 

be directed, at McElroy’s discretion, to an authorized 

service center or distributor.

TX02486-11-4-13

DISCLAIMER OF LIABILITY

McElroy accepts no responsibility of liability for fusion 

joints. Operation and maintenance of the product is the 

responsibility of others. We recommend qualified joining 

procedures be followed when using McElroy fusion 

equipment.
McElroy makes no other warranty of any kind whatever, 

express or implied; and all implied warranties of 

merchantability and fitness for a particular purpose which 

exceed the aforestated obligation are hereby disclaimed 

by McElroy.

PRODUCT IMPROVEMENT

McElroy reserves the right to make any changes in or 

improvements on its products without incurring any 

liability or obligation to update or change previously sold 

machines and/or the accessories thereto.

INFORMATION DISCLOSED

No information of knowledge heretofore or hereafter 

disclosed to McElroy in the performance of or in 

connection with the terms hereof, shall be deemed to be 

confidential or proprietary, unless otherwise expressly 

agreed to in writing by McElroy and any such information 

or knowledge shall be free from restrictions, other than a 

claim for patent infringement, is part of the consideration 

hereof.

PROPRIETARY RIGHTS

All proprietary rights pertaining to the equipment or 

the components of the equipment to be delivered by 

McElroy hereunder, and all patent rights therein, arising 

prior to, or in the course of, or as a result of the design 

or fabrication of the said product, are exclusively the 

property of McElroy.

LAW APPLICABLE

All sales shall be governed by the Uniform Commercial 

Code of Oklahoma, U.S.A.

Register your product online to activate your warranty: 

www.McElroy.com/fusion

(Copy information listed on the machine nameplate here 

for your records).

Model No.

Serial No.

Date Received

Distributor

Содержание In Field





























Отзывы: