Operation
Remove the Coupon
After all the saw cuts are made, the coupon is freed from the fused
pipe.
Remove the coupon.
TX04077-5-25-10
Saw the Coupon (cont'd)
For smaller pipe, saw out the section of pipe and then saw the
pipe in half long ways so that you have your holes all on one side
of the cut pipe.
Saw cut one end of the pipe so that it is 1.25" away from the
edge of the outer hole.
Make saw cuts on the inner holes from the inside out making sure
to completely cut all the way through. This will allow the coupon to
break in the inner reduced section only.
TX04076-02-24-15
PH
0417
0-5-
20
-10
PH
0417
9-5-
25-10
PH
04171-5-
20
-10
PH
0418
3-5-
25-10
3 - 5
1.25"
