Perform Test
Move the directional valve to the right position.
Slowly pump the handle until the coupon breaks or until you reach
the end of the cylinder stroke. The flow of the pump is limited in
this direction to provide a slow tensile load to the coupon.
Remove the coupon.
NOTICE:
The gauge does not provide significant information
during a test and should be ignored.
TX04080-1-31-11
Additional Coupons
Your quality control procedures may require additional coupons
from the unused circumference of the same fusion joint. Move the
template to the next required position on the joint and repeat the
steps to produce a coupon.
TX04090-5-25-10
Operation
3 - 7
PH
03
98
2-
7-14
-0
9
CD00
85
0-5-
25-10
PH
04
52
3-
3-
2-11
