McDATA 1U Server, Инструкция по установке и обслуживанию

Страница: 44 / 48

2
2-8
1U Server Installation and Service Manual
Remove and Replace the Hard Drive
5. Select
Next
and the following panel as shown in Figure 2-4 is displayed
showing the new hard drive to be rebuilt (mirrored).
Figure 2-4
Hard Drive to be Rebuilt
6. Select
Next
and a panel warning you that all data from the new hard drive
will be erased.
7. Select
Finish
to complete the process. It will take approximately two hours
for the process to complete. During the RAID 1 rebuild process the server
will be very slow until the mirroring (rebuilding) is completed. The display
will also show that the original hard drive is still in a Missing Status.
Figure 2-5 shows the percent complete of the hard drive rebuilding
(mirroring) process.
Figure 2-5
IMSC showing the Rebuild process