McDATA 1U Server, Инструкция по установке и обслуживанию

Страница: 31 / 48

1
Installation
1-7
Configure Windows Operating System Users
Configure Gateway and DNS Server Addresses
To configure gateway and DNS server IP addresses for the private LAN
connection (
LAN 2
) and public LAN connection (
LAN 1
):
1. With the attached KVM, at the Windows desktop, click
Start
at the left side of
the task bar (bottom of the desktop), then sequentially select
Settings
,
Control
Panel
, and
Local Area Network Connections
. The
Network and Dial-up Connections
window displays.
2. To configure addresses for the private LAN connection (
LAN 2
), double-click
the
Local Area Connection 2
icon. The
Local Area Connection 2 Status
dialog box
displays.
3. Click
Properties
. The
Local Area Connection 2 Properties
dialog box displays.
4. In the
Components checked are used by this connection
field, double-click the
Internet Protocol (TCP/IP)
entry. The
Internet Protocol (TCP/IP) Properties
dialog
box displays.
5. The
Use the following IP address
radio button is enabled and the
IP address
and
Subnet mask
fields display network information configured while performing
Configure Network Addresses
on page 1-4.
6. At the
Default gateway
field, enter the gateway address obtained from the
customer.
7. Select (enable) the
Use the following DNS server addresses
radio button. At the
Preferred DNS server
field, enter the DNS server IP address obtained from the
customer, then click
OK
to apply the changes and close the dialog box.
8. Close dialog boxes as appropriate and return to the The
Network and Dial-up
Connections
window.
9. Record the changed gateway and DNS server addresses.
10. To optionally configure addresses for the public LAN connection (
LAN 1
),
double-click the
Local Area Connection 1
icon and repeat step 2 through step 9 .
11. Close all dialog boxes and return to the Windows desktop.
12. Restart the server (
Access the Server Desktop
on page 1-6).
Configure Windows Operating System Users
Configure password access for all authorized Windows (server) users. It is also
recommended to change the default administrator password.
NOTE:
The
Guest
user name is a built-in account in the Windows operating system and
cannot be deleted. The
server
account is for field service users and must not be modified or
deleted.
Change Default Administrator Password
If requested by the customer to change the administrator password from the
default (
password
), perform these steps: