McConnel Robocut RC56, Руководство оператора

Страница: 56 / 72

45
HOOD
DOWN
HOOD
UP
Tool Height Control
The tool height is controlled by forward and backwards operation of
the
right-hand joystick ;
Push the lever forwards to lower the tool.
Pull the lever backwards to raise the tool.
Float Activation/deactivation (Flailheads)
The ‘float’ feature is primarily designed for machines with a flailhead
fitted. Activation and deactivation of the ‘float’ feature is via the ‘AUX’
toggle button on the right-hand side of the remote control unit;
Press AUX button to switch the ‘float’ ON/OFF.
When activated this feature provides ±15° of horizontal float and
advanced float that can be pre-programmed to the user’s desired
settings.
‘Float’ setting information is accessed via ‘User Settings’ on the machine’s
interactive control panel. On-screen instructions will guide the user through
all aspects of selection, setting and activation of the advanced float features.
Hood (Accessory) Control
Hood control for flail heads is operated using the left-hand joystick ;
Move the lever to the left to raise the hood.
Move the lever to the right to lower the hood.
For machines fitted with an accessories other than a flailhead this control can be used to
operate a non-proportional service on that equipment.
TOOL
DOWN
TOOL
UP