McConnel Robocut RC56, Руководство оператора

Страница: 37 / 72

26
AUX
\ AUX
Float Settings – Manual Adjustments
Float settings can be manually adjusted by the user to suit their individual requirements;
these adjustments are performed in the ‘Float Settings Screen’.
Adjustments available are;

Increase/decrease the machines load bearing pressure.

Float response speed; LOW (Recommended), MEDIUM or HIGH .
Supported Weight Adjustment:
Navigate to highlight the ‘+‘ or ‘-’ icon then press ‘Enter’ button repeatedly to increase or decrease the
machines load bearing pressure figure (bar).
Increase (+) load bearing pressure Decrease (-) load bearing pressure
Press ‘Enter’ repeatedly to adjust
Float Response Adjustment:
Navigate to highlight the ‘+‘ or ‘-’ icon then press ‘Enter’ button to scroll the LOW
●
MED
●
HI options
Select ‘+’ and use ‘Enter’ to scroll left to right and select ‘-‘ and use ‘Enter’ to scroll right to left.
Select (+) to scroll options left to right Select (-) to scroll options right to left
Press ‘Enter’ to select response speed
The default float response speed setting is LOW: this is the recommended option for normal work and conditions.
Navigate to the ‘tick’ icon and press ‘Enter’ to accept settings and exit the float settings screen.
Float Operation
Press button on remote control to ACTIVATE or DEACTIVATE ‘float’ feature.
Unless subsequently changed, when float has been calibrated, and/or individual float settings
entered, the settings for that particular attachment will remain in the systems memory, even if it is
removed from the machine and re-mounted at a later date.