McConnel Robocut RC56, Руководство оператора

Страница: 42 / 72

31
Warning & Error Screens
These screens display warnings and/or error information that is received from the engine
and machine management systems.
Press ‘F2’. Use arrow buttons to highlight ‘Warning Settings’. Press ‘ENTER’ button.
Category menu will be displayed. Use navigation buttons to highlight required category.
Engine Machine Engine menu selected Machine menu selected
Engine Menu Machine Menu
Press ‘Enter’ to view ‘Engine Faults Screen’. Press ‘Enter’ to view ‘Vehicle Errors Screen’.
Engine faults display screen: Vehicle errors display screen:
If a vehicle error is displayed, the cause should be checked and appropriate action taken to rectify the issue
and clear the error. The example error shown above (RC E_Stop ACTIVE) is a message the system reports
when the machine is not detecting a wireless signal from the remote control unit; switching the remote control
unit ‘ON’ and synchronising the control with the machine will clear this error message.
If an engine fault is displayed the
machine must be switched off
immediately and the fault code
reported to your local dealer.
When an engine fault occurs the
engine will enter ‘limp mode’; the
machine should not be used until
the fault has been rectified.