McConnel Robocut RC56, Руководство оператора

Страница: 45 / 72

34
Service Verification
When a machine service has been completed, it must be verified to confirm and record the
service date.
Service Verification Procedure
Use navigation buttons to select the ‘Complete Service’ section of the service screen.
Press ‘Enter’ to access the service code input screen.
Select Mode Input Mode
Number boxes have 2 modes; ‘select mode’ and ‘input mode’
Code digits can only be entered in a box when it is set to ‘input mode’; use ‘Enter’ button to toggle between
‘select mode’ and ‘input mode’; when input mode is active use arrow buttons to input the required digit.
Select first digit box Change to ‘input mode’ Select first digit of code Set ‘select mode’
Select second digit box Change to ‘input mode’ Select second digit of code Set ‘select mode’
Select third digit box Change to ‘input mode’ Select third digit of code Set ‘select mode’
Select last digit box Change to ‘input mode’ Select last digit of code Set ‘select mode’
Numbers shown here are for illustration purposes only; the number is not a valid verification code.
Navigate to the ‘Enter’ icon. Press ‘Enter’ to access verification screen.
Press ‘Enter’ to accept and close.
Date will be logged in service history.
Verification of a service requires a ‘Service Validation Code’ which must be entered during
the verification procedure; contact your dealer to obtain the 4 digit service code.