McConnel ECON HEDGEMASTER Mk3, Руководство оператора

Страница: 22 / 78

5
▲
Always disengage the machine, kill the tractor engine, remove and pocket the key
before dismounting for any reason.
▲
Always clear up all debris left at the work area, it may cause hazard to others.
▲
Always ensure when you remove your machine from the tractor that it is left in a safe
and stable position using the stands and props provided and secured if necessary.
WHEN NOT TO USE THIS MACHINE:
▲
Never attempt to use this machine if you have not been trained to do so.
▲
Never use a machine until you have read and understood the operator handbook, are
familiar with it, and practiced the controls.
▲
Never use a machine that is poorly maintained.
▲
Never use a machine if guards are missing or damaged.
▲
Never use a machine on which the hydraulic system shows signs of wear or damage.
▲
Never fit, or use, a machine on a tractor that does not meet the manufacturer’s
minimum specification level.
▲
Never use a machine fitted to a tractor that does not have suitable front, rear and
side(s) cab guarding made of metal mesh or polycarbonate.
▲
Never use the machine if the tractor cab guarding is damaged, deteriorating or badly
fitted.
▲
Never turn a machine cutting head to an angle that causes debris to be ejected
towards the cab.
▲
Never start or continue to work a machine if people are nearby or approaching - Stop
and wait until they are at a safe distance before continuing. WARNING: Some cutting
heads may continue to ‘freewheel’ for up to 40 seconds after being stopped.
▲
Never attempt to use a machine on materials in excess of its capability.
▲
Never use a machine to perform a task it has not been designed to do.
▲
Never operate the tractor or machine controls from any position other than from the
driving seat, especially whilst hitching or unhitching the machine.
▲
Never carry out maintenance of a machine or a tractor whilst the engine is running –
the engine should be switched off, the key removed and pocketed.
▲
Never leave a machine unattended in a raised position – it should be lowered to the
ground in a safe position on a level firm site.
▲
Never leave a tractor with the key in or the engine running.
▲
Never carry out maintenance on any part or component of a machine that is raised
unless that part or component has been properly substantially braced or supported.
▲
Never attempt to detect a hydraulic leak with your hand – use a piece of cardboard.
▲
Never allow children near to, or play on, a tractor or machine under any circumstances.