McConnel ECON HEDGEMASTER Mk3, Руководство оператора

Страница: 59 / 78

42
First use with a new machine ▲
Restrict forward speed
Check nut & bolt tightness regularly
NEW MACHINES: PREPARATION & GENERAL PRECAUTIONS
IMPORTANT: Always read the book first before attempting to operate the machine –
practise operating the machine, without the rotor running, in a safe open space until you
are fully familiar with all controls and functions of the machine. Only begin using the
machine for work when you are confident that you have mastered the controls and
operation sufficient for safe use of the machine.
CAUTION: Care must be taken when working with the flailhead close in to avoid
contact with the tractor.
‘Running In’ a New Machine
For the first days work with a new machine it
is recommended that tractor forward speed is
restricted to 3 km/hr.
(2 mph)
maximum. This
will allow machine components ‘bed in’ and
allow the operator to become familiar with the
controls and their response under working
conditions whilst operating at a relatively slow
speed. If possible, select a first days work
that affords mainly light to average cutting
with occasional heavy duty work –
during this
period check the tightness of nuts and bolts
after; one hour, four hours and again at the
end of the day, retightening as and when
required.
General Work Precautions
Inspect the work area prior to operation, remove any hazardous materials and note any
immovable objects -
it may also be a wise precaution to indicate these hazards with a
visible marker than can be easily seen from the operating position in the tractor.
If the type of work being undertaken makes this important precaution impractical, always
maintain a high degree of alertness and restrict the tractors forward motion to a speed that
allows sufficient time to stop the tractor or avoid the hazard before contact is made.
General Working Practice
It is the operator’s responsibility to develop safe working procedures;
Always:
ƒ Be aware of hazards in the vicinity.
ƒ Ensure all guards are fitted correctly and in good condition.
ƒ Disengage PTO before stopping the engine.
ƒ
Wait until the flail has stopped running before leaving the tractor seat.
ƒ Disengage the PTO, stop the engine and pocket the key before making any
adjustments.
ƒ Check frequently that all nuts and bolts are tight.
ƒ Keep bystanders at a safe distance.