Installation and use
SOLID CONTROL MCK 2200
4
1. General description
The MCK 2200 computer is designed for use on a sprayer machine, and in the
automatic mode, it uses ultrasonic sensors mounted on the sides of the machine to
allow the plant to only be sprayed when it is detected by the sensor: this guarantees
optimisation of product consumption and less operator fatigue.
There is a 5-digit LCD display at the front of the computer, with green LED back-lighting
for night vision and 11 membrane keys, 7 of which include the "ACTIVATED
FUNCTION" signalling LED.
There is also an additional green LED to indicate the presence of the power supply
voltage.
The instrument is designed and built according to the MC Elettronica standard
procedures.
Any certificates can be requested by the Customer before starting the mass production.
The electronic board of the MCK 2200 computer is treated with silicone resin to
increase its resistance to possible infiltration of humidity or condensation and is
enclosed in a grey and black self-extinguishing ABS container, fitted with a bracket
with removable fastening handwheels that allow the instrument to be removed quickly,
if necessary.
WARNINGS. To avoid improper instrument use, we would like to reiterate that the
product in question must be used exclusively for the purposes it was designed for.
MC elettronica will not be held liable for incorrect application of the product.
The final design is in compliance with the delivery date agreed upon. Development of
the prototype and mass production will only begin after MC Elettronica receives the
document of approval, countersigned by the customer as acceptance.
ALL
RIGHTS
RESERVED.
THIS
MANUAL
IS
INTENDED
FOR
CUSTOMERS
ONLY.
ANY
OTHER
USE
IS
FORBIDDEN.
