Installation and use
SOLID CONTROL MCK 2200
14
In the second case, it is therefore that one of the two sections works in automatic mode
and the other in manual mode.
In manual mode, the sensor signal relating to the section running in manual mode is
ignored and the relative solenoid valve is continuously activated and can be switched
off or reactivated by the operator using the keys ref. D or E or I.
The count of the litres (distributed and left) and that of the plants (partial and total)
takes place in the same way as the automatic mode.
Even in this case, the key ref. G has priority over the status of the two sections when
the following is pressed:
AUTO/MAN GEN=ON → SECTIONS=ON
AUTO/MAN GEN=OFF → SECTIONS=OFF.
The LEDs of the keys mentioned above follow the status of the function
associated with them.
5. Technical features
Power supply voltage
10 - 16 Vdc
Maximum current absorption at 16 Vdc (excluding
outputs)
400 mA
Protection rating
IP 65
Operating temperature range
-20 / +70 °C
Storage temperature range
-25 / +85 °C
Resistance to mechanical vibrations
2 g random
Project reference standards
MC14982
