MC Crypt PA-12000, Руководство по эксплуатации

Страница: 21 / 26

34
Mise en service
Fonctionnement partiel :
Raccordement pour les haut-parleurs RAVELAND avec effet lumineux
L’amplificateur est équipé d’une prise d’alimentation électrique pour les enceintes RAVELAND avec
effet lumineux.
Ne raccordez qu’une seule enceinte RAVELAND avec effet lumineux par prise de cou-
rant d’éclairage LIGHTING POWER (9).
Ne raccordez ici que des haut-parleurs RAVELAND avec effet lumineux.
Le non-respect de ces consignes peut entraîner une surcharge de la prise de cou-
rant d’éclairage et endommager l’amplificateur.
FUSE
LIGHTING
POWER
POWER OUT
CH 1
4 - 16 OHM
POWER OUT
CH 2
4 - 16 OHM
INPUT
CH 2
INPUT
CH 1
+
+
PA 5000/8000 MK II
+
+
- -
FUSE
LIGHTING
POWER POWER OUT
4 - 16 OHM
CH 1
LINE IN
CH 1 CH 2
LINE IN CH 2
DIRECT OUT CH 2
LINE IN CH 1
DIRECT OUT CH 2 AUDIO MODE
SUB FULLRANGE
CH 2
+
+
PA 12000
23
Initial operation
Connect one LIGHTING POWER (9) connection
to one lighting effect connection on your RAVE-
LAND speakers.
The lighting effects of the speakers are auto-
matically activated when the power amplifier is
switched on.
Mains connection
Before connecting the power amplifier to the mains power supply, make sure that
the POWER switch (1) is off and that the LEVEL volume control (2) is turned right
down (all the way to the left).
Only for the PA-12000 model:
Connect the device connection plug of the
power line to the mains connection (8) on the
device.
Plug the mains cable of the power line (8) into a
proper wall socket.
The POWER switch (1) is used to switch the
amplifier on and off.
Operation
After having made and checked all the necessary connections, you can put the amplifier into ope-
ration.
Turn the LEVEL volume control (2) to minimum
(left stop).
Only for the PA 12000 model:
Put the AUDIO MODE switch (11) into the positi-
on that corresponds with your configuration.
Switch on your audio source (mixer, equalizer
etc.) and the connected devices.
Turn the amplifier POWER switch (1) on.
Use a 3.5 mm jack cable.
Polarity:
Tip: Positive terminal
Shaft: Negative terminal
The device is switched on when the switch is in
position „I“ and switched off when it is in positi-
on „O“.
The device is still switched off.
SUB
The power amplifier works as subwoofer ampli-
fier and plays back the frequency range below
120 Hz.
FULL RANGE
The power amplifier works in normal mode and
plays back the entire frequency range.
The audio source volume control is in the mini-
mum position.
Switch to „I“ position.