18
Intended Use
The LED DMX Effect Light is used to generate light effects in light show equipment, party rooms, etc. and is
controlled using the built-in controller or an external DMX controller.
This product is approved for connection to 220-240V~/50Hz AC only.
The DMX connection may only be connected to suitable DMX controllers.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided.
Any use other than that described above will damage this product and involves the risk of short circuits, fire,
electric shock, etc.
The product must not be modified or converted, and the casing must not be opened.
The safety instructions always have to be observed!
Symbols
This symbol on the device indicates that the user should read and observe these
operating instructions before using the product.
The symbol with a lightning in a triangle is used where there is a health hazard, e.g. from
electric shock. The device contains no parts that require servicing by the user. Therefore,
never open the device.
The arrow symbol indicates special advice and operating information.
The exclamation mark indicates important notes in these operating instructions that
should be strictly observed.
F
The F symbol indicates that the device is suitable for installation on normal flammable
surfaces.
...m
This symbol indicates the minimum distance to the illuminated surfaces.
