28
11. Handling
• Never connect the power plug immediately after the device has been taken from a cold to a warm environment.
The resulting condensation could destroy the device.
Allow the device to reach room temperature before connecting it. Wait until the condensation water has
evaporated.
• Never pull on the power cable. Only unplug it by pulling on the plug.
• Unplug the power supply if you do not use the device for an extended period of time.
• For safety reasons, disconnect the mains plug from the mains socket in case of a thunderstorm.
• Never touch the device close to the fog output opening when it is in operation or shortly after operation is stopped.
This part of the device becomes extremely hot. There is risk of burning!
• Never use contaminated fog liquids. Always close the tank and the reservoir for your fog liquid right after filling.
• Always empty the tank before transporting the device or not using it for a longer period.
• Only use water-based fog liquids. Suitable fog liquids are listed in the “Technical Data” section.
12. Disposal
At the end of its service life, dispose of the product according to the relevant statutory regulations.
13. Troubleshooting
By purchasing this fog machine, you have acquired a product that has been designed according to state-of-the-art
technology and that is operationally reliable.
Nevertheless, problems or errors may occur.
Therefore, we would like to describe how to eliminate possible faults here:
Please observe the safety notes!
