25
9. Operation
9.3 Interval Mode
• Press the yellow TIMER button on the remote control.
• The device now emits fog time-controlled and the yellow indicator LED is lit.
• Set the desired interval time using the INTERVAL control.
• The device emits fog for the set time and then pauses for as long as the set time as well. Afterwards the described
interval starts again.
• To deactivate interval operation, press the yellow TIMER button on the remote control again.
9.4 DMX Mode
• Each DMX device in a DMX chain requires an assigned DMX channel to be clearly identified by the controller.
• Such DMX channel is defined by the DIP switches 1 to 9 on the device. Each DIP switch is assigned a value. The
total of the assigned values then defines the assigned DMX channel.
DIP switch 10 does not have a function.
• Please refer to the table below for the values of the individual DIP switches 1 to 9. If a switch is in the “ON” position,
it is activated, while in the “OFF” position it is deactivated.
DIP Switch
DMX Value
1
1
2
2
3
4
4
8
5
16
6
32
7
64
8
128
9
256
Example:
The DIP switches 1, 3 and 5 are “ON”, all other switches are “OFF”.
DMX channel = 1 + 4 + 16 = 21
