40
Operation
• The programme speed can also be set through the TAP DISPLAY (10) button. Press it twice. The interval
between the two times corresponds to the programme speed.
• To stop a running programme, press the PROGRAM/PAUSE button (3). The scene sequence is stopped.
• Press the button PROGRAM/PAUSE button (3) again to reactivate the programme.
• To darken the effect light without interrupting the programme sequence, press the BLACKOUT (11) button.
Pressing this button again switches the effect light on again.
Checking a Programme
• Press and hold the PROGRAM/PAUSE button (3) until the respective LED flashes.
• Press the BLACKOUT button (11) to deactivate blackout mode.
• Select the desired programme with the BANK buttons (9).
• Press the SCENE (2) buttons to check the different scenes.
Changing Single Scenes in a Programme
Often, separate scenes must be changed. You do not have to change the complete programme, but may also change
single scenes.
• Press and hold the PROGRAM/PAUSE button (3) until the respective LED flashes.
• Press the BLACKOUT button (11) to deactivate blackout mode.
• Select the desired programme with the BANK buttons (9).
• Press the SCENE (2) button for the scene to be changed.
• Select the desired light effect to be changed with the respective SCANNER (1) button. The corresponding LED
must flash.
• Now change the selected scene with the channel faders (18) until it corresponds to your requirements.
• Proceed accordingly with the other effect lights to be changed for this scene by selecting them with the
SCANNER (1) buttons and changing the respective channel fader (18) settings
• Press the MIDI/REC button (5).
• Press the SCENE (2) button for the scene changed to save the change.
• Proceed accordingly with any other scenes to be changed.
• Press and hold the PROGRAM/PAUSE button (3) to leave the programming mode again.
