MBW R270R Скачать руководство пользователя страница 4

Страница: 4 / 56

SAFETY NOTICE & DECALS (EC10D ONLY)

IMPORTANT NOTICE

The

SAFETY ALERT SYMBOL"

is used to call attention to items or operations that may be

dangerous to machine operators or others working with this equipment. The symbol can be

found throughout this manual and on the unit itself. Please read these messages carefully.

READ SAFETY DECALS CAREFULLY

Carefully read and follow all safety decals. Keep them in good condition. If decals become

damaged, replace as required. If repainting,

REPLACE ALL

decals. Decal Kits are

available from authorized MBW Distributors.

USE DECAL SET 12101

#01436, ON FUEL TANK

(GASOLINE ONLY)

#13483, ON FUEL TANK

(GASOLINE ONLY)

01067

FUEL MIXTURE

(After break in period)

Mix 50 parts gasoline to 1

part 2-cycle engine oil

(50:1).

#01067, ON FUEL TANK

OPERATING

INSTRUCTIONS

01436

1. Open fuel valve.
2. Choke engine. A warm engine may not

need to be choked.

3. Set throttle at idle position.
4. Pull starter rope.
5. After starting: open choke.
6. For normal usage set throttle fully open.
7. To stop: Return throttle to idle position,

press Stop" button, close fuel valve.

13483

Read the Operating Instructions before

operating this piece of equipment.
Keep unauthorized and untrained

people away from this equipment.

ROTATING & MOVING PARTS!

Make

sure all guards and safety devices are in

place.

DO NOT RUN

this machine in an enĆ

closed area. The engine produces carĆ

bon monoxide, a

POISONOUS GAS.

Wear approved hearing protection, foot

protection, eye protection and head

protection.

SHUT OFF

the engine before servicing,

cleaning or adding fuel.

Failure to comply could result in seriĆ

ous bodily injury.

CAUTION

#14770, ON HANDLE

(RATCHET STYLE

THROTTLE ONLY)

#01060, ON AIR CLEANER

01064

#01326, SPRINGBOX COVER

AIR CLEANER INSTRUCTIONS

CLEAN ELEMENT DAILY. MORE OFTEN UNDER DUSTY CONDITIONS.

TAP ELEMENT LIGHTLY ON A FLAT SURFACE - IF DUST DOES NOT

DROP OFF EASILY OR IF ELEMENT IS BENT OR CRUSHED...................

REPLACE IT!

WARNING: DO NOT OPERATE ENGINE WITHOUT AIR CLEANER

ELEMENT - INTERNAL DAMAGE WILL RESULT!

06079

#06079, ON AIR CLEANER

#01064 ON ENGINE

Machine is top heavy.

Attach proper

safety chains to this bar when lifting.

13531

Approximate weight: 160 lbs. (73 kg)

Model R540 only:

205 lbs. (93 kg)

WARNING

#13531 ON HANDLE

SHROUD

Содержание R270R

























































Результаты поиска

Содержание R270R

Отзывы:

Похожие инструкции для R270R

Бренды по названию

Популярные бренды

MBW R270R, Руководство по безопасности и обслуживанию оператора

Результаты поиска

Содержание R270R

Отзывы:

Похожие инструкции для R270R

Бренды по названию

Популярные бренды