MBW R270R Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 56

background image

11

WARRANTY

WARRANTY

THIS IS YOUR WARRANTY - PLEASE READ AND SAVE

1. MBW INC, Slinger Wisconsin, warrants each new machine against defects in material and workmanship

under normal use and service for a period of six (6) months. This warranty commences the first day the

machine is sold, assigned to a rental fleet, or otherwise put to first use.

2. The obligation under this warranty is limited to the replacement or repair of parts and/or machine at MBW

INC factory branches or at authorized MBW INC Distributors.

3. Machines altered or modified without MBW INC written consent voids this warranty. Misuse, negligence,

accidents or the operation of machines in any way other than recommended by MBW INC will void this

warranty. This warranty shall not apply to machines repaired by other than MBW INC factory branches or

authorized MBW INC Distributors.

4. This warranty includes labor on all MBW INC products. Labor must be performed at an authorized MBW INC

Distributor.

5. The cost of transportation and other expenses connected therewith are not covered by this warranty.
6. Written authorization for the return of merchandise under warranty must be obtained from MBW INC,

Slinger, Wisconsin. In England: MBW (UK) LIMITED, Bradley Fold Trading Estate Unit 6, Radcliffe Moor

Road, Bolton BL2 6RT.

7. MBW INC reserves the right to inspect and render final decision on each warranty case.
8. MBW INC reserves the right to improve or make product changes without incurring any obligation to

update, refit, or install the same on machines previously sold.

9. MBW INC is not responsible for any liability or damage or injury directly or indirectly from design, material or

operation of its products.

10. Warranty card must be returned to MBW INC, P.O. Box 440, Slinger, Wisconsin 53086-0440, within 10 days

after purchase, assignment to a rental fleet, or first use. In England: MBW (UK) LIMITED, Bradley Fold

Trading Estate Unit 6, Radcliffe Moor Road, Bolton BL2 6RT. Failure to return warranty card as specified

renders the warranty null and void.

11. Requests for warranty must be submitted in writing within 30 days after machine failure to MBW INC, P.O.

Box 440, Slinger, Wisconsin 53086-0440. In England: MBW (UK) LIMITED, Bradley Fold Trading Estate

Unit 6, Radcliffe Moor Road, Bolton BL2 6RT.

12. THE FOREGOING WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR

IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE, AND OF ALL

OTHER OBLIGATION OR LIABILITIES ON OUR PART, AND WE NEITHER ASSUME NOR AUTHORIZE ANY

OTHER PERSON TO ASSUME FOR US ANY OTHER LIABILITY OR WARRANTY IN CONNECTION WITH

THE SALE OR SERVICE OF ANY OF OUR PRODUCTS. LIKEWISE, THIS WARRANTY SHALL NOT APPLY

WITH RESPECT TO ENGINES, MOTORS AND OTHER COMPONENT PARTS PRODUCED BY OTHER

MANUFACTURERS AND USED ON MBW PRODUCTS, BUT SUCH ITEMS SHALL HAVE SUCH

WARRANTIES AS MAY BE PROVIDED BY THE MANUFACTURER THEREOF.

MBW INC.

250 HARTFORD ROAD

P.O. BOX 440

SLINGER, WI 53086-0440

PHONE: (262) 644-5234

FAX (262) 644-5169

MBW CORPORATE INTERNET ADDRESS

E-MAIL: [email protected]

WEB SITE: www.mbw.com

IN ENGLAND:

MBW (UK) LIMITED

Bradley Fold Trading Estate Unit 6

Radcliffe Moor Road

Bolton BL2 6RT

Phone: 01204 387784

FAX: 01204 387797

«
...
11
12
13
14
15
...
»

Содержание R270R

























































Отзывы:

Нет отзывов

Похожие инструкции для R270R

Бренд: Weber mt Страницы: 24

Бренд: Enarco Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды