MBS UBR-01 | Mk II
Configuration
17 von 46
7
Configuration
Network connection
For configuration, the device must be connected to the computer
using a network cable.
The computer then
automatically
(
APIPA
) receives a free IP address in
the address range 169.254.x.x and can communicate directly with the
device.
If there is no direct (point to point) connection between the device and
the computer or if the IP address is not assigned automatically, it must
be configured manually on the computer (e.g. IP address 169.254.0.5 /
subnet mask 255.255.0.0).
Notice
It is important that the manually configured IP address is not already
in use by other devices on the network.
The way to configure the network connection on the computer
depends on its operating system.
Under
factory settings
, the web server is accessible at the following IP
address:
IP address
169.254.0.1
Subnet mask
255.255.0.0
Web server
The device has an integrated web server for configuration. The web
server provides the configuration settings in the form of websites.
Login
To call up the configuration interface, the following address is entered:
http://169.254.0.1
or
https://169.254.0.1
To log in to the web server for the first time, the user name and the
preset password must be entered.
