MBS UBR-01 | Mk II
Configuration
27 von 46
GENERAL
Update
Enables a file to be transferred to the device that contains a software
update. The current software version is also displayed here.
Notice
Here only a file may be selected, which was provided by the
manufacturer of the system. The name is obligatory "
update.upd
".
Press <Start> to start transferring the file to the device. The update is
not yet executed during the transfer. This only happens when the
device is restarted once.
Notice
The configuration is not changed by an update.
Restart
The device can be specifically restarted here.
The restart is performed to accept
configuration changes. It should be
completed after approximately
30 seconds.
Notice
With the selection 'complete restart' the hardware is restarted. This
is equivalent to switching off and on again.
The device will not transfer any data for a few minutes afterwards.
The configuration is completely retained.
The device cannot perform its function in the network during the
restart. The web server cannot be reached during the restart.
