Solid fuel stove for central heating Thermo IN is made and tested according to the
European standard EN 13240. Figure 1 shows appearance of stove with integral
parts important for handling and use. Table 1 gives its technical characteristics.
Table 1. Technical characteristics
No. Technical characteristics
1 Nominal thermal power (kW) ______________________19
2 Efficiency (%)
wood_________________________________________88
brown coal_____________________________________87
3 Thermal power transferred to water (kW) _____________11
4 Thermal power transferred to environment (kW) ________8
5 The average CO value (taken from 13% O2):
wood _____________________________________0,09 %
1,156 g/m³
brown coal _________________________________0,11 %
1,427 g/m³
6 Dust emission:
wood __________________________________________0,068 g/m³
brown coal ______________________________________0,065 g/m³
7 Dimensions – W x H x L (mm) _______________________590x1000x540
8 Dimensions of firebox – W x H x L (mm)________________408x320x390
9 Quantity of water in boiler (l) _________________________23
10 Diameter of fume outlet (mm) ________________________120
11 Water adapters (”) _________________________________1
12 Draught (Pa) ____________________________________15 -17
13 Average flue gases temperature (°C) _________________123, 1
14 Maximal water temperature (°C) ______________________90
15 Recommended fuel______________________________ wood, briquette
16 Consumption at nominal power (kg/h) ____________________6
17 Max. working pressure (bar) ____________________________2
Solid fuel stove Thermo IN is intended for heating of residential premises. Valve for
thermal exhaustion is integral part of installation which serves as overheating valve.
Thermal valve
Caleffi 544 1/2
is recommended and displayed on Figure 2.
Comment:
Thermal valve is not part of the product and not supplied with it. Boiler
guarantee is valid exclusively with built-in thermal valve.
