44
BASE SETTINGS
SETTING THE DIAL
MODE
Two dial modes are supported: pulse dial and tone
(DTMF) dial.
• Stand-by mode
• Press the [
F/R
]
key
to
display ”bASE SETTING”
in the LCD display.
• Now press the [ ]
key
.
• When ”SETTING dIAL” is
displayed, press the [ ]
key
.
• The menu contains two
options: PULSE and DTMF
(tone) dial. You can toggle
between both with the
[
F/R
]
key
.
Select the required dial
mode and press the
[ ]
key
to confirm
your selection.
• ”SETTING dIAL” is again
displayed on the LCD.
The setting procedure is
complete.
• Press the [ ]
key
to return to stand-by mode.
You can program the base set to send an earth or flash
signal to the telephone network when a register recall
instruction is received. The basic setting depends on the
country in which the telephone is used. The initial setting
after a reset of the base is EARTH.
• Stand-by mode
Base setting
Setting 8ial
DTMF
PULSE
multi
multi i
Setting 8ial
PROGRAMMING
EARTH / FLASH TIME
