The functions available on the handset (PP) depend on
the active mode. At least one of the following modes is
enabled at any time:
Stand-by
The handset is in stand-by mode after installation. In this
mode the handset is not used actively. The LCD displays
only the antenna icon and the handset number. The
handset number is displayed on the right of the LCD.
Stand-by mode capacity: max. 250 hours
Talk time: max. 10 hours
Not Subscribed
(not registered)
The Not Subscribed mode is enabled when the handset
has not registered with the base set ( FP ). NOT SUB is dis-
played on the LCD.
Lock
The Lock mode is enabled when the handset is locked for
outgoing calls and only incoming calls are allowed. The
lock icon is displayed on the LCD. To enable the lock
mode, press the
On
[ ] key in stand by mode briefly
(max. 0.5 sec). To disable the lock mode, press the
On
[ ] key again.
Direct Call
The Direct Call mode is enabled if the settings of the
handset are such that when any key is pressed (except
the defined key combination) a previously programmed
number is dialed out automatically. This mode has no
effect on incoming calls.
Dial Preparation
The Dial Preparation mode is enabled when a number is
processed and the
link key
[ ] is not pressed.
17
HANDSET
HANDSET MODES
